911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
INFORMATION: Only when replacing the cover.
3. Position cover -3- on the front of the padding -2-.
4. Align Velcro strip -1- on the cover with the Velcro fastener on the padding -2- and secure it -arrow-.
5. Position cover -1- and padding -2- on the backrest shell -3- and straighten it -arrows-.
6. Press joint on cover -1- into the backrest shell -2- near the top of the headrest -arrows-.
7. Press joint on cover -1- into the fastening clamps -2- near the belt strap guide -arrows-.