911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Convertible Top Control Module: Service and Repair
Removing And Installing Control Unit For Hood
Tools
Technical Values
Preliminary work
1. Move convertible top to service position.
2. Removing cover over the motor
2.1. To loosen the carpet, pull out the plastic clips with the special tool 21 and take out the carpet. Removal tool, universal NR.21
3. If the control unit must be replaced, then read out the values from the control unit before removal. PIWIS Tester 9718. Refer to Removing and
installing control unit for convertible top.
Removing control unit for hood
Removing control unit for convertible top
INFORMATION: If the control unit for the convertible top must be replaced, first the values must be read from the control unit using the PIWIS tester
9718. Refer to Removing and installing convertible top control unit.
1. Unscrew both fastening screws -1- for the convertible top control unit.