911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-25001.png)
Control Module: Service and Repair
Removing and installing transmission control unit (PDK)
Preliminary work
Preliminary work for transmission control unit (PDK)
Remove left front seat.
Remove rear side trim panel at the left.
Remove left door entry guard.
1. If the control unit has to be replaced, the values must be read out of the PDK control unit using the PIWIS Tester 9718 before removing the
control unit.
Removing transmission control unit (PDK)
