911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Unscrew screws -1- (the screws -1- can only be accessed using a 1/4-inch tool). Pull off plug connection and take out rotation-rate sensor.
Installing rotation-rate sensor
1. Install in reverse order.
Rotation-rate sensor
Subsequent work
1. After installing the rotation-rate sensor, read out the PSM fault memory with the PIWIS Tester (diagnostic tester) and erase it.
Diagnostic tester
Carry out a static test. Then start the engine. The PSM-related lights in the instrument cluster must go out when the engine is running.
Read out the PSM fault memory again. There must not be any stored faults.