911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
4. Unscrew B+ line -3- at box for B+ line.
4.1. Open box for B+ line at transmission -Arrow A-, unscrew fastening nut -Arrow B- and remove the B+ line.
INFORMATION: For vehicles with manual transmission.
5. Unclip B+ line -3- from transmission bracket.
5.1. Open holder -Arrow A- and remove B+ line -Arrow B-.
INFORMATION: For vehicles with automatic transmission.
6. Remove transmission bracket.
6.1. Support automatic transmission with transmission jack WE WE1082.
6.2. Unscrew the four fastening screws and the two fastening nuts.
6.3. Remove transmission bracket.
INFORMATION: For vehicles with automatic transmission.
7. Unscrew guide tube of B+ line -3- from body.
7.1. Unscrew fastening screw and fastening nut on guide tube of B+ line.