911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
1. Fold power windows -1- together and insert through the door opening -arrows-.
CAUTION: Noises on the power windows due to interfacing the window lifter rails.
-
When moving the window lifter rails, they must be adjusted in parallel both during the first installation as well as during subsequent
adjustment.
2. First position the lower fastening points of the power windows -1- to the dimension -X = 5 mm- and tighten with fastening nuts - 2-. Tightening
torque: Final tightening: 7 ftlb.
3. Then screw down the upper fastening points of the power windows -1- with the fastening nuts -2-. Tightening torque: Final tightening: 7.2 ftlb.
4. Clip in cable at retaining clip -1-.