911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
2. Pull the protection plate -3- upwards out of the chamber in the water drip pan -4-.
CAUTION: Damage to hydraulic lines.
-
Do not bend, trap or crush hydraulic lines when removing and installing.
-
Pay special attention when routing hydraulic lines in the clips.
3. Unscrew fastening nut -5- and lay hydraulic cylinder -6- with lever to one side.
Removing rear window lifter
INFORMATION: Removal and installation of the rear window lifter should be carried out with the side window. Otherwise adjustment work is
hindered during installation.