911 Turbo Cabriolet AWD (997) F6-3.8L Turbo (2011)
/f6-3.8l_turbo/Page-76001.png)
Paint: Service and Repair
Foreward
F1.1 - Foreward
F 1.1 Foreword
This guide contains technical information as well as instructions for painting Porsche vehicles.
The descriptions form the basis for professional and correct maintenance. The content of the work procedures described is based on the level of training
of a spray painter who has completed vocational training and has a sound knowledge of the product. This level of knowledge is necessary in order to
carry out the work described.
Due to the continuous development and improvement of of vehicles, there may be discrepancies between the actual technical status of the vehicles and
the work descriptions. Any existing deviations are corrected by means of supplements, and the scope of the descriptions is extended with supplements.
See: F1.2 - Using the Paint Guide
F1.2 - Using the Paint Guide
F 1.2 Using The Paint Guide
F 1.2.1 Elements of the Paint Guide
F 1.2.1.1 Warning notes
The warning notes and safety instructions are classified by the respective indicative word (Danger, Warning, Caution) next to the warning symbol.
DANGER: Warns against death or very serious injury, which will certainly occur if the instructions are not observed.
WARNING: Warns against death or very serious injury, which may occur if the instructions are not observed.
CAUTION: Warns against minor injury or damage to property if the instructions are not observed.
To prevent injury and restricted operating and traffic safety of the vehicle, or damage to the vehicle as a result of incorrect work, read these instructions
carefully and observe them without fail.
It is not possible to give a detailed evaluation of all danger situations for the persons carrying out the work. It is therefore imperative that all persons
carrying out repair and maintenance work on Porsche vehicles use their specialist knowledge to ensure that their own safety is not at risk and the
procedure chosen will not have any negative effects on the vehicle-especially with regard to safety.
It is therefore expressly specified that all work involved in the work procedures described should be carried out only in accordance with the valid
guidelines and regulations of the local authorities responsible with respect to health and accident prevention and environmental protection, and in
compliance with the legal requirements of individual countries.
F 1.2.1.2 Notes
Notes contain advisory information relating to the work procedure, which makes the fitter's work easier. The following pictogram indicates this
information:
NOTE: Contains advisory information which makes the work procedure easier.
F 1.2.1.3 Quickblock
The Quickblock is used to present procedural instructions. This serves as a rough guide and overview of the individual work steps to be completed by the
user. Important details can be found directly here, thereby saving the user from having to look up the material data sheets.
