911 Turbo Coupe F6-3299cc 3.3L SOHC Turbo (1988)
-
Mount ring gear. using locally manufactured centering pins as guides.
-
Tighten ring gear bolts to:
^
11.9 Material 135-140 Nm (96-103 ft lb)
^
12.9 Material 150-160 Nm (111-118 ft lb)
-
Slide lockplate into groove of bolts, squeeze front end with pliers (to firmly unite lockplate with bolts) and lock by bending lockplate down over
side of bolt head.
-
Coat differential pinions with MoS2 paste.