911 Turbo Coupe F6-3299cc 3.3L SOHC Turbo (1988)
Disassembly
NOTE: For better understanding the blow-up drawing shows the entire drive shaft without a clamping plate. The parts up to and including
number 16 are dismantled and assembled without removing the drive shaft.
-
Clamp special tool no. 9104 in a vise, insert drive shaft and loosen nut with special tool no. 9105.
NOTE:
-
Special Tool 9105 cannot be used to unscrew and tighten the collar nut due to the longer drive shaft in transmission type 930/34 for Turbo 3.3
ltr.
