911 Turbo S Cabrio AWD (997) F6-3.8L Turbo (2011)
/f6-3.8l_turbo/Page-60002.png)
1. Unscrew fastening screws -2- and fastening nuts -3-.
2. Pull cover for side underbody -1- out of the overlaps.
Removing cover for centre underbody
INFORMATION: Fastening nuts cannot be used again following removal.
1. Unscrew fastening nuts -3-.
2. Press covers for side underbody -1- downward slightly and remove cover for centre underbody -4- from the overlaps.
Installing cover for centre underbody
