911 Turbo S Cabrio AWD (997) F6-3.8L Turbo (2011)
/f6-3.8l_turbo/Page-61002.png)
Installing cover for front underbody
INFORMATION: When sliding in the underbody cover, make sure the overlap is correct.
1. Insert cover for front underbody -1-.
2. Tighten fastening screws -2-. Tightening torque -> : 1.5 ftlb.
3. Tighten fastening nuts -3-. Tightening torque -> : 0.5 ftlb.
Subsequent work
Lower the vehicle.
