911 Turbo S Cabrio AWD (997) F6-3.8L Turbo (2011)
/f6-3.8l_turbo/Page-63003.png)
INFORMATION:
-
Push in wheel housing liner toward the outside up to contact in wing stop position.
-
Ensure that the right wheel housing liner is guided through the opening on the wheel well.
1. Insert wheel housing liner -A-.
2. Tighten fastening nuts -1-. -> Tightening torque: 2.5 Nm (2 ftlb.).
3. Tighten fastening screws -2-. -> Tightening torque: 2.8 Nm (2 ftlb.).
Subsequent work
1. Fit front wheel.
