911 Turbo S Cabrio AWD (997) F6-3.8L Turbo (2011)
6. Weld in the front panel
6.1. Apply a full weld to the front panel in areas -A- and -B- using inert gas.
7. Install floor front section.
8. Install end plate.
Subsequent work
Subsequent work for body repairs
1. Remove vehicle from the straightening bench.
2. Clean welded joints and sheetmetal flanges with a wire brush.
3. Prime flange areas with 2K primer.
4. Restore standard sealing with body sealant.
5. Restore standard undersealing with underbody sealant.
6. Paint repair area and adjacent surfaces, if necessary.
7. Install removed add-on parts in the repair area.
8. Apply cavity preservation.