911 Turbo S Cabrio AWD (997) F6-3.8L Turbo (2011)
10. Fully position dashboard support -2- and screw fastening screws in by hand at the left and right -1-.
11. Align dashboard support and tighten fastening screws at the left and right -1-. -> Tightening torque: 23 Nm (17 ftlb.)
12. Secure dashboard support -3- at the right with the fastening screw -1-. -> Tightening torque: 9.7 Nm (7.5 ftlb.)
13. Position bracket -2- and secure with the fastening screw -1-. -> Tightening torque: 9.7 Nm (7.5 ftlb.)
14. Tighten fastening nuts -1- close to the plenum panel. -> Tightening torque: 23 Nm (17 ftlb.)