911 Turbo S Cabrio AWD (997) F6-3.8L Turbo (2011)
18. Position length compensation -2- on dashboard support and secure in place with the fixing clip -1-.
INFORMATION: Only for USA/Canada version vehicles
19. Position knee protector -2- on dashboard support and secure in place with fastening screws -1-. -> Tightening torque: 9.7 Nm (7.5 ftlb.)
Subsequent work
1. Install alarm horn.
2. Lock steering column plug connection and install steering column.
3. Install brake pedal.
4. Install brake light switch.
INFORMATION: Only for vehicles with manual transmission.
5. Install clutch pedal.
6. Install control unit for KESSY/PAS.
7. Install vehicle electrical system control unit with bracket.
8. Install relay carrier 1.
9. Install tunnel support.
10. Install air guides.
11. Install dashboard.