911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
S 9.9.1 Standox(R) 2K Plasticizer (new)
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
Description:
Elastic-rendering additive for:
-
Standocryl(R) 2K Topcoat
-
Standocryl(R) 2K HS Topcoat
-
Standocryl(R) 2K HS Clear
-
Standocryl(R) 2K Crystal Clear
-
Standocryl(R) 2K MS Express Clear
-
Standocryl(R) 2K System Clear
-
Standox(R) 2K Nonstop Primer Filler
-
Standox(R) 2K Universal Filler
Properties:
-
Gives 2K products the necessary permanent elasticity for plastic paint finishes.
Base surfaces:
-
Please refer to the respective data sheets
NOTE:
-
Raw material base: Special polymers
-
Flash point: 27° C/80.6° F
-
Spec. weight: 1.05 g/cm3
-
Solid content: 77.0% weight/72.6% vol.
-
Clean equipment after use with cleaning thinner
VOC value:
-
233 g/l
WARNING: 2K paints react with moisture. All work equipment, mixing vessels, etc. must therefore be completely water-free.
S 9.9.1.1 Processing