911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
/f6-3.6l_turbo/Page-905004.png)
9. Removing fastening strap at the main bow
Removing wedge.
a. Unscrew fastening screws -arrow A-.
b. Unscrew fastening screw -B- from the shaped sheetmetal part on the main bow from behind.
c. Pull the connection of the fastening strap off the shaped sheetmetal part.
10. Removing holding strap of the convertible-top covering
a. Press out fastening clip from roof frame 3 on the inner right. On the left side, press the fastening clip of the wiring harness out of roof frame 3.
11. Removing convertible-top covering at the corner bow
a. Undo the bond of the inner cloth covering -inset A- around the corner bow.
b. Fold the convertible-top covering forwards to the roof frame.
c. Pull seal -arrow B- out of the groove of the corner bow and disengage the covering strip of the convertible-top covering in downward
direction.
12. Removing convertible-top covering at the main bow.
