911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
10. Installing wedge
Position wedge -27- on the main bow -14- and tighten with the fastening screws -28-.
Tightening torque: 2.8 Nm (2.0 ftlb.)
11. Installing drive lever
Position drive lever -29- on the main bow -14- and secure the drive lever -29- with retaining clip -7- SLB 10.
Installing electrical wiring harness
1. Installing wiring harness on roof frame 1 and 3
a. Clip the fastened clips on the convertible-top wiring harness -30- into the holes provided on roof frame 1 -11- (clipped in 3 positions).
b. Clip the fastened clips on the wiring harness -30- into the holes provided on roof frame 3 -8- (clipped in 2 positions).
Dimension -inset X- up to model year 2001. Position angle on roof frame 3 and screw in with the fastening screws -33-. Fit rubber sleeve
-31aand plastic cover -31b- on the bracket -31-.
Tightening torque: 2.8 Nm
Dimension -inset Y- as of model year 2002. Position plastic bracket -32- on roof frame 3 and screw in with the fastening screws -33-.
Tightening torque: 2.8 Nm