911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
/f6-3.6l_turbo/Page-914005.png)
2. Installing wiring harness on convertible-top support
a. Clip wiring harness -30- into the holes provided on the convertible-top support -1-.
3. Installing wiring harness on convertible-top support
a. Clip wiring harness -30- into the holes provided on the convertible-top support -1-.
4. Installing potentiometer
a. Insert potentiometer fork into the pins of the hydraulic housing.
b. Position potentiometer -34- on the convertible-top support -1- and tighten with the fastening screws -35-.
Tightening torque: 2.8 Nm (2.0 ftlb.)
