911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
2. Installing styling frame on roof frame 2
a. Screw on fabric guide plate -50- and styling frame -51- with the Torx screws T 15 -52- and the washers -52a-.
Tightening torque: 1.7 Nm (1.0 ftlb.)
b. Position styling frame -51- on roof frame 2 -5-. Adjust gap dimension -A = 3.1 + 0.5- between styling frames 2 and styling frame 3 -48-. Screw
on fastening screws -53- and the washers -53a-.
Tightening torque: 9 Nm (7.0 ftlb.)
Installing seals on the styling frame
1. Installing seal on styling frame (roof frame 3)
a. Position aluminium profile -54- on the styling frame -48- and screw on with the fastening screws -55-.
b. Insert the seal -56- into the aluminium profile -54-.
Tightening torque: 1.7 Nm (1.0 ftlb.)