911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
Installation overview of the coolant regulator
1 Install coolant regulator
2 Install coolant regulator housing
3 Push on coolant hose
4 Install closure cap
5 Bleed coolant circuit
1. Install coolant regulator.
a. Insert coolant regulator in the housing as shown.
b. Push against the spring force using assembly aid 9627 and turn until both sheetmetal edges are touching the housing.
2. Install coolant regulator housing
a. Clean sealing surfaces.
b. Position coolant regulator housing with a new seal.