911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
/f6-3.6l_turbo/Page-228011.png)
21. Subsequently press in the central bushing as far as it will go using the handwheel.
22. Remove holder P 140 from the studs.
23. Remove the spacer 9561 again between the crankcase and cylinder.
24. Subsequently push the cylinder in the direction of the crankcase and move to its installation position.
25. To avoid the cylinder bank being pushed out when the horizontal cylinder bank is fitted or when the crankshaft is turned, secure cylinder bank with
holder P 140.
