911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
Removal
1. Raise the vehicle at the jacking points.
Caution: Danger of material damage if the vehicle is raised incorrectly or if the vehicle is driven incorrectly onto the lifting platform!
^
Lift the vehicle only at the take-up points shown in the figure!
^
When driving onto a platform lift, make sure that there is sufficient distance between the platform lift and the vehicle!
2. Remove oil filler cap.
3. Undo the oil drain plug (a/f 19) on the oil container. Make sure to counter with a wrench (a/f 27) when doing this. Unscrew the loosened plug and
drain the oil.
Caution: Danger of scalding from draining oil!
^
Take suitable protective measures to avoid scalding by hot oil