911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
/f6-3.6l_turbo/Page-242005.png)
3. Screw down the oil tank fastening point on the lower right side.
4. Fill in engine oil.
Note:
^
The oil change quantity (without oil filter change) is approximately. 7.8 liters after a dripping time of 20 minutes!
5. Warm the engine up to operating temperature and carry out a leak test.
6. Check the oil level.
7. Check engine oil level. Check engine oil level on the instrument cluster. Top up engine oil until the 7th segment of the on-board computer display
lights up. The following conditions must be maintained for the measurement.
^
Vehicle horizontal
^
Engine at operating temperature
^
Engine idling
^
Vehicle stationary
