911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
Air Door Actuator / Motor: Removal and Replacement
Removing And Installing Drive Motors
INFORMATION: Removal or installation is performed with the heating/air-conditioning unit installed.
Removing drive motors
Removing drive motor for temperature valve and central valve
1. Remove footwell bulkhead and air guides. Unclip centre console cover at the front and remove the footwell vent -(3 screws)-.
2. Press pivot pin on the adjusting lever together and disengage the deflection lever.
3. Unscrew drive motor of the heating/air-conditioning unit and disconnect the electrical plug connection.
Removing drive motor for footwell/defrost
1. Unscrew drive motor with bracket from the heating/air-conditioning unit -(2 screws)-.
2. Swivel drive motor to the side and disengage the deflection lever.
3. Disconnect electrical plug connection and detach bracket from the drive motor.