911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
/f6-3.6l_turbo/Page-991002.png)
3. Unlock the electrical plug connection and take out control module.
Installing control module for headlight beam adjustment
NOTE:
-
Once installed, the control module must be coded and calibrated with the Porsche System Tester 2.
-
After this, the main headlights must be readjusted with a commercially available 5 mm ball-head screwdriver (free blade length 150 mm).
1. Lock the electrical plug connection and fasten the control module to the bracket.
2. Install the right air guide and footwell bulkhead.
Adjust the main headlights: Refer to No. 0, Entire vehicle - General
