911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
/f6-3.6l_turbo/Page-213002.png)
Removing and installing rear-wheel bearing
Notes on removal and installation
Information:
^
The wheel bearing is removed and installed with the wheel bearing housing removed.
Removing
1. Remove brake disc, parking brake shoes, brake disc cover and speed sensor.
2. Press the rear-wheel hub out using press-out mandrel P297a. Use the separator as a support. If there is not enough space for the wheel hub between
the press, appropriate shims will additionally be necessary.
