911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
Intercooler Duct: Service and Repair
Removing And Installing Air Guide For Charge Air Cooling
Removing air guide for charge air cooling
Preliminary work: Disassemble the accessories of the rear spoiler (includes rear end, lower central heat shield and bumper).
1. Remove wheel housing liner.
2. Pull the two connecting hoses off the charge air cooler. To do this, disconnect the connecting hose between the engine and charge air cooler at the
separation point beneath the tail light. Unclip the safety bracket and pull out the hose.
-
Open hose clamp at bottom of charge air cooler and pull off the flange.
3. Remove charge air cooler. To do this, disconnect both hose connections on the charge air cooler. Then unscrew the seven fastening screws on the
charge air cooler (two at rear)
-
two at heat shield
-
and three in wheel housing. Remove charge air cooler.
4. Unscrew cover panel.