911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
/f6-3.6l_turbo/Page-409005.png)
32. Pull off the right and left coolant hoses. Lever off locking clip for this purpose.
33. Refit the locking clip on the coolant neck.
34. Remove bracket for generator. Undo hexagon-head bolts.
35. Loosen coolant neck.
36. Undo coolant hoses over the coolant pump.
NOTE:
-
Tip for easier assembly:
-
The coolant hoses are easier to remove when the complete bracket is removed later.
37. Loosen the stabilizer at top and swivel it downward.
NOTE: When swivelling, make sure not to damage the bellows on the lower joint:
