911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
/f6-3.6l_turbo/Page-409006.png)
38. Support the engine-transmission unit. Fasten special tool (retaining device) 9624/1 on the take-up points of the stabilizer mounts. The pressure disc
must rest on the crankcase or crash support.
39. Separate engine carrier from the engine mounts (wrench size 18).
40. Loosen engine carrier on the bracket.
41. Secure the bracket with a shorter auxiliary screw (M10 x 55).
42. Detach the oil supply line from the bracket (right-hand side).
43. Detach the oil supply lines from the bracket (left-hand side).
