911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
4. Unscrew the fastening screw -B- and remove the belt tensioner.
Installing belt tensioner
1. Install belt tensioner. Observe the direction of travel -3-.
2. Screw fastening screw -B-, tightening torque 50 Nm (37 ftlb.).
3. Insert electrical plug -A- in the belt tensioner.
4. Push in fuse -2- with e.g. a screwdriver in the -direction of travel- until the fuse engages.
5. By gently pulling on the belt -arrow 1-, check the winding ability of the belt strap.
6. Read out the fault memory with the Porsche System Tester.