911 Turbo S Cabriolet (996) Yaw Rate Sensor Service and Repair Guide
Note:
^
The transverse acceleration sensor is integrated in the rate-of-turn sensor.
First version: Rate-of-turn sensor with part No. 996.606.147.00
After supplies of the old sensor have been used up, install the new rate-of-turn sensor with part number 996.606.145.00!
New/current version: Rate-of-turn sensor with part No. 996.606.145.00.
Introduced in production shortly prior to the end of model year 2000. The new/current rate-of-turn sensor can be retrofitted. The following instructions
describe the conversion.
Overview of rate-of-turn sensor conversion
In case of first-time installation of the new/current rate-of-turn sensor, the front center console support -1and the holder -2- must be replaced. The
following parts are omitted: The bow -4- over the rate-of-turn sensor -3- and the cable guide -5-. The adapter plug -X- must be installed between the
plug -6- and the rate-of-turn sensor -3-.