911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
/f6-3.6l_turbo/Page-106001.png)
Turbo Boost Sensor: Service and Repair
Removing And Installing Pressure Sensor
Removal
1. Undo hexagon-head bolt and pull pressure sensor out of the pressure pipe.
2. Press the button on the plug and pull off the plug at the same time.
Installation
1. Fasten pressure sensor with a new hexagon-head bolt (M6 x 16) and tighten to 10 Nm (7.5 ftlb).
2. Fit plug. The plug should engage audibly.
