911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
Impact Sensor: Service and Repair
Removing And Installing Sensor For Side Airbag
Remove sensor for side airbag
NOTE:
-
Sensors for triggering the side airbag unit are fastened on the inner lower side member on the left and right-hand sides in the vehicle.
-
After an accident, the sensor of the triggered side airbag unit must be examined for damage and replaced if necessary.
-
The sensor must be replaced after the side airbag has been triggered for the third time
-
Safety conditions must be observed when handling airbags.
-
Remove front seat.
-
Remove the side lining at rear.
-
Remove sill.
1. Disengage floor covering at the support and lay it in the vehicle interior.
2. Unlock locating peg -1- of the support using the commercially available removal tool.