911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
^
Only use the original valve cap!
Notes on removal and installation
1. Do not use commercially available steel valves. The Porsche valves (part nos. 993.361.073.00) are shorter (dimension X). -Dimension X- is
approx. 43 mm for the Porsche version!
2. The complete valve only is available as a spare part. See Spare Parts catalog!
3. The valve insert is commercially available!
4. The valve cap -1- is provided with a seal (air-tight seal). Do not confuse with a commercially available valve cap! The shaft of the fastening nut -2-
must point towards the valve foot, because otherwise the valve will not be secure!
5. Position of the disc must be observed -3- -arrow-. If the disc is fitted incorrectly, the O-ring will be damaged -4-. Serious damage is possible as a
result!
Removal
1. Unscrew valve cap.