911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
10. Remove support bracket sleeve -A- on selector lever cable from support bracket -B-. To do this, press retaining clip -C- together and pull the
support bracket sleeve out of the support bracket.
11. Lever the end piece of the selector lever cable off the transmission lever with a commercially available removal tool. The selector lever cable can
be pulled down somewhat with the transmission lever to allow better access to the separation point.
Note:
^
When separating the selector lever cable and the transmission lever, make sure not to bend the transmission lever or kink the selector lever
cable too much.