911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
Differential Output Shaft: Service and Repair
Removing and Installing Sealing Ring For Halfshaft Flange - GT2
Removing Sealing Ring For Halfshaft Flange
Removing sealing ring for halfshaft flange
1. Unclip the B-plus cable from the holder -A- (only the right side).
2. Uncouple drive shaft on the transmission side. Unscrew the hexagon socket head bolts -B-.
3. Unscrew the fastening screw between the halfshaft flange and the transmission.
4. Unscrew the halfshaft flange out of the transmission past the drive shaft.
5. Lever out sealing ring using a suitable tool.
Installing Sealing Ring For Halfshaft Flange
Installing sealing ring for halfshaft flange
1. Fill the space between the dust and sealing lips with grease (e.g. Liqui-Moly) and drive in the sealing ring up to the mounting face with special tool
pressure piece 9252.