911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
2. Move shift lever to neutral position and fix with special tool (locking bridge) 9619.
3. Remove shift console cover.
4. Disengage selector cable -A- and shift cable -B- on shift console. To do this, slide the locking sleeve -F- forward as far as it will go and turn it
clockwise to removal position.
A Selector cable (blue)
B Shift cable (black)
C Adjuster open
D Adjuster closed
E Support bracket sleeve
F Locking sleeve
5. Carefully disengage support bracket sleeves -E- upward out of the shift console. Unlock the support bracket sleeves by pressing in both plastic
clips.