924 L4-1983cc 2.0L SOHC (1982)
Matching tires with forged, perforated disc wheel rims
Matching procedure
^
a machined depression on the rim well of the perforated disc wheel rim marks the point of highest radial run-out
^
a red locating dot is pasted on the outside of the rim to mark the same point of highest radial run-out
^
tires are marked with a green dot
-
align red and green dots when installing tire on rim
^
dots must be within 30 mm (1 3/16 in.) of each other
Note
If the red locating dot is missing, mark the location of machined depression with chalk or tape before installing tire.
Wheel bolts
a Part No. 803.601,139.B 14 x 1.5 mm, length 25.5 mm, shoulder diameter 24 mm for 5.5 x 14 in. steel rims tightening torque 110 N-m (11 mkp)
b Part No. 477.601.139 14 x 1.5 mm, length 25 mm, shoulder diameter 28 mm for 6J x 14 in. light alloy rims tightening torque 130 N-m (13 mkp)
c Part No. 477.601.139.A 14 x 1.5 mm, length 70 mm, shoulder diameter 28 mm for 6J x 15 in. light alloy rims tightening torque 130 N-m (13 mkp)