928 S V8-4957cc 5.0L (1985)
FIGURE 2
5.
The drilled holes must be countersunk on the front side of the speaker. Installed screws should be approximately flush with the speaker mounting
surface (Fig. 2).
6.
Use black tape to cover the old holes.
7.
Install speaker. Do not over torque mounting screws. Install speaker grille.
8.
Switch on radio and check speaker function.
Parts needed:
Four screws 4.2 x 19
Part Number:
900 145 084 07
Required time units:
One door:
50 T.U.
Both doors:
90 T.U.