porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Air Flow Control Box - A/C|Page 3077 > < Housing Assembly HVAC|Diagrams|Page 3074
Page 1
background image

Housing Assembly HVAC: Service and Repair
Air Flow Control Box - A/C

Removal

REMOVING AND INSTALLING HEATER-AIR CONDITIONER

1. Disconnect battery. If car has electrically adjustable seats, move seats to rearmost, lowest position (easier access).

2. Discharge air conditioner.

3. Drain coolant.

4. Remove instrument scoops.

5. Remove center console.

6. Remove instrument panel.

7. Remove air ducts to the side vents and to the glove compartment vent.

8. Remove defroster vents.

9. Remove bracket for left-hand oddments tray.

10. Unscrew bracket holding control unit of cruise control and move to right.

11. Remove blower cover in engine compartment.

12. Remove wiper motor.

13. Disconnect plug from thermo bimetal switch and antifreeze unit.

14. Unscrew low-pressure and high pressure lines from expansion valve and plug lines.

Air Flow Control Box - A/C|Page 3077 > < Housing Assembly HVAC|Diagrams|Page 3074