928 S4 V8-4957cc 5.0L (1987)
Shift Cable: Adjustments
SELECTOR LEVER CABLE, ADJUST
1.
Place selector lever into neutral position.
2.
Place range selector lever on transaxle into neutral position.
3.
Adjust ball end on cable until cable attachment is possible without tension.
4.
After adjustment tighten range selector lever attaching bolt.
CONTROL CABLE, ADJUST
1.
If necessary, adjust idle speed.
2.
Ensure accelerator cable is adjusted correctly and without play.
3.
Adjust ball end on control cable until attachment without tension is possible.