944 L4-2681cc 2.7L (1989)
6.
Door Seal: If water accumulates in the door and drains when the door is opened, cut out small areas of the door seal (arrow 2) to allow for free
flow of water from the drain holes in the lower edge of the door shell. (A new seal has been introduced in production.)
Section D:Door Window Adjustment
-
Moving upward on the slot of mounting point "A" causes the window glass to swing upward in the rear.
-
Moving downward at mounting point "A" causes the window to swing downward at the rear.
-
The alignment between the door window glass and top seals can be adjusted with the rear window guide rail (arrow 4). Mounting bolt "5" turned
clockwise will cause window glass to move outward. The opposite occurs when turning mounting bolt "5" counterclockwise.
-
The window glass height can be adjusted by the stop bolt on the window regulator (arrow 6).
