944 L4-2681cc 2.7L (1989)
Impact Sensor: Service and Repair
Note
The front sensors are positioned on left and right in the driver and front-passenger footwells at the top on the wheelhouse wall. The installation
position is fixed by the method of mounting.
1. Disconnect battery and cover over pole/battery.
2. Take apart plug connector.
3. Loosen rip nuts with special tool P 9259.
Note
Use 1/4 inch inside hexagon for tightening the rip nuts. Use specified washers. The mounting points on the body must be bare down to the
metal.