944 Turbo L4-2479cc 2.5L SOHC Turbo (1988)
Throttle Position Switch: Service and Repair
-
Turn ignition OFF.
-
Disconnect the harness from the throttle switch/sensor.
-
Remove the 2 retaining screws from the throttle body, carful not to drop the screws.
-
Pull off the switch assemble and replace.
-
Reinstall and lightly tighten the throttle switch mounting screws, switch must be able to move.
-
Hold throttle in the closed position.
-
Slowly rotate switch counterclockwise until inner stop is felt.
-
Tighten mounting screws.