porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

All Technical Service Bulletins for Battery:|08901 > < Battery - Diagnosing a Discharging Condition|Page 4150
Page 1
background image

Battery: All Technical Service Bulletins
Battery - Revised With Vent Hose

Group

2

Number
8904

Model
924S, 944, 944S, 944T

Part Identifier
2706

May 19, 1989

Subject:
Battery with Vent Hose

From May 1988 production, a new battery, PN 944 611 105 00 with vent hose is installed. The vent hose is connected to a 90~ angle fitting on the
battery and is routed into the water tray drain at the right of the battery.

New type replacement batteries are packaged with:

1000 mm vent hose

PN 477 915 505

90~ angle fitting

PN 893 915 507

When installing new type batteries into 85/2 and up cars, cut a 250 mm long piece of hose and install onto the 90~ angle fitting. Route the hose into the
water drain at the right of the battery.

When installing new type batteries into 1983-85/1 944 and 924S cars, do not use the vent hose. Routing of a battery vent hose through the water drain
into the engine compartment is not allowed.

All Technical Service Bulletins for Battery:|08901 > < Battery - Diagnosing a Discharging Condition|Page 4150