968 Cabriolet L4-2990cc 3.0L DOHC (1993)
Use the spare key to turn the locks of the driver and passenger doors in the "closing" direction. The display must switch from open to closed.
-
If closed is displayed in the off position, check wiring from lock cylinders to alarm control unit plug II, terminal 1, for proper grounding according
to wiring diagram.
-
If display remains in the open position after the lock cylinders have been actuated, check wiring for continuity according to wiring diagram.
11.
Use the spare key to turn the locks of the driver and passenger doors in the "opening" direction. The display must switch from open to closed.
If closed is displayed in the off position, check wiring from lock cylinders to alarm control unit plug II, terminal 2, according to wiring diagram for short
to ground.
If display remains in the open position after the lock cylinders have been actuated, check wiring for continuity according to wiring diagram.
12.
In the standard configuration, this input is not used. Auxiliary systems may be connected to this input.
Open is displayed if input is not used. If required, check auxiliary systems according to manufacturer's instructions.
13.
Refer to item 12.
14.
Refer to item 13.
