968 Cabriolet L4-2990cc 3.0L DOHC (1993)
Air Bag: Service and Repair
Removing & Installing Driver Side Airbag Unit
Removing and Installing Driver's Airbag Unit
1. Disconnect battery and cover pole or battery.
2. Unscrew two mounting screws with a Torx T 30 screwdriver socket.
Note Screws must be replaced each time they are loosened.
3. Disconnect plug.
Note
The airbag unit must always be laid aside in such a manner that the padded side faces up.
Airbag units must be placed under lock when removed for a long time. Conform with the safety precautions.
Tightening torque for mounting screws: 10 Nm (7 ft. lbs.).