968 Cabriolet L4-2990cc 3.0L DOHC (1993)
Air Bag: Service and Repair
Removing & Installing Airbag Steering Wheel
Removing
1. Disconnect battery and cover pole or battery.
2. Remove driver's airbag unit. See:
3. Unscrew and remove hexagon nut with the spring washer.
4. Mark position of steering wheel to steering shaft for reinstallation.
Installing
1. Mount steering wheel in straight ahead position of the road wheels or according to the removal marks in such a manner, that the upper steering
wheel Spokes are horizontal.
Note
Steering wheel must be mounted in such a manner that electric leads of the contact unit are not pinched.
2. Install hexagon nut with spring washer and tighten with 45 Nm (32.5 ft. lbs.).
3. Install driver's airbag unit.
4. Check function of horn.